Solar Inverters
Morningstar TriStar TS-MPPT-60 Charge Controller in Kenya
Original price was: KSh 85,000.00.KSh 65,000.00Current price is: KSh 65,000.00.
Morningstar TriStar TS-MPPT-60 Charge Controller is an MPPT solar charge controller for battery-based PV systems in Kenya with 60A, 150V. It gives customers a specific Morningstar controller page to compare model, charging current, PV voltage limits and battery-system compatibility.
10 in stock
The Morningstar TriStar TS-MPPT-60 Charge Controller is a professional 60A MPPT solar charge controller designed for larger battery-based solar PV systems in Kenya.
With a 60A maximum battery charging current and 150V maximum PV open-circuit voltage (Voc), the TS-MPPT-60 provides efficient solar battery charging for off-grid, telecom, commercial, agricultural and remote power installations. Morningstar’s TrakStar MPPT technology continuously tracks the solar array’s maximum power point to maximise available solar energy.
Morningstar TriStar TS-MPPT-60 Specifications
| Specification | Details |
|---|---|
| Brand | Morningstar |
| Series | TriStar MPPT |
| Model | TS-MPPT-60 |
| Controller type | MPPT solar charge controller |
| Maximum battery current | 60A |
| Maximum PV open-circuit voltage (Voc) | 150V DC |
| Battery operating voltage range | 8–72V DC |
| Peak efficiency | Up to 99% |
| Charging algorithm | 4-stage |
| Charging stages | Bulk, Absorption, Float, Equalize |
| Communications | MeterBus, RS-232, EIA-485, Ethernet |
| Operating temperature | -40°C to +60°C |
| Enclosure | Type 1, indoor and vented, IP20 |
| Warranty | 5 years |
| Application | Battery-based solar PV systems |
These specifications are based on Morningstar’s current TriStar MPPT technical documentation.
High-Efficiency MPPT Solar Charging
The Morningstar TS-MPPT-60 uses Maximum Power Point Tracking (MPPT) technology to maximise energy harvested from the solar array and deliver controlled charging power to the battery bank.
Morningstar rates the TriStar MPPT series at up to 99% peak efficiency, making the TS-MPPT-60 suitable for solar installations where efficient energy conversion and dependable battery charging are important.
Designed for Larger Solar PV Systems
The TS-MPPT-60 supports a maximum continuous battery charging current of 60A and a maximum PV open-circuit voltage of 150V DC.
For the 60A model, Morningstar specifies nominal maximum controller output of:
- 800W on a 12V battery system
- 1,600W on a 24V battery system
- 3,200W on a 48V battery system
Morningstar also specifies maximum recommended PV array inputs of approximately 1,100W at 12V, 2,100W at 24V and 4,200W at 48V for the 60A models.
Advanced Battery Charging
The Morningstar TriStar TS-MPPT-60 uses a four-stage charging algorithm consisting of:
- Bulk
- Absorption
- Float
- Equalize
The controller supports lead-acid batteries and programmable charging profiles for lithium, NiCd and other battery chemistries. Custom programming is required when using battery types outside the standard lead-acid settings.
This flexibility makes the TS-MPPT-60 suitable for professional solar systems with different battery technologies and charging requirements.
Monitoring and Communications
The TS-MPPT-60 provides extensive communications capabilities for monitoring, configuration and integration with larger energy systems.
Communication interfaces include:
- Ethernet
- EIA-485
- RS-232
- Morningstar MeterBus
These interfaces support system monitoring, data collection and integration with compatible Morningstar accessories and third-party monitoring systems using supported communications protocols.
The TS-MPPT-60 does not include the front digital meter as standard. The TS-M2 meter is optional, while the related TS-MPPT-60M model includes the meter.
Where to Use the Morningstar TS-MPPT-60
The Morningstar TriStar TS-MPPT-60 is ideal for:
- Off-grid solar power systems
- Telecom and communication sites
- Commercial solar installations
- Farms and agricultural systems
- Remote monitoring stations
- Rural electrification systems
- Cabins and remote properties
- Battery backup installations
- Security and surveillance systems
- Institutional solar systems
- Industrial solar applications
Morningstar positions the TriStar MPPT range for demanding off-grid, commercial, residential, industrial and remote-energy applications.
Solar Array Sizing
Correct PV array sizing is essential when installing the Morningstar TS-MPPT-60.
The controller has a maximum PV open-circuit voltage of 150V DC. The complete solar string must therefore remain below this limit under all expected operating conditions.
Solar module Voc increases as temperature falls, so the maximum array voltage must be calculated using the lowest expected site temperature, rather than relying only on the module’s standard test condition rating.
Morningstar also states that PV voltage must be at least 1V higher than battery voltage for charging to begin.
Electronic Protection
The Morningstar TriStar TS-MPPT-60 includes electronic protection against several common solar-system faults, including:
- Solar overload
- PV short circuit
- High PV voltage
- Battery high voltage
- High temperature
- Lightning and transient surges
- Reverse current at night
These protections contribute to dependable operation in professional battery-based solar installations.
Built for Professional Solar Installations
The TS-MPPT-60 uses a robust fanless design with no mechanical relays. Morningstar also specifies conformally coated circuit boards, epoxy-encapsulated inductors and marine-rated terminals as part of its design for demanding environments.
The controller operates from -40°C to +60°C, although Morningstar specifies that the TS-MPPT-60 may require output derating above 45°C under the stated test conditions.
What to Check Before Ordering
Before purchasing the Morningstar TriStar TS-MPPT-60 Charge Controller in Kenya, confirm:
- Battery-bank voltage
- Battery chemistry
- Required battery charging profile
- Total solar array wattage
- Solar panel Voc and Vmp
- Maximum cold-temperature corrected PV Voc
- Solar panel string configuration
- Maximum expected charging current
- Cable sizes and cable distances
- Required DC breakers and fuses
- Temperature-sensing requirements
- Monitoring requirements
- Communication interfaces
- Required accessories
- Installation environment
Correctly matching the solar array, battery bank and controller ensures reliable charging and keeps the system within the TS-MPPT-60’s electrical operating limits.
Why Choose the Morningstar TriStar TS-MPPT-60?
The Morningstar TriStar TS-MPPT-60 is a high-performance MPPT charge controller built for larger and more demanding battery-based solar systems.
Its combination of 60A charging capacity, 150V maximum PV Voc, up to 99% peak efficiency, four-stage battery charging and Ethernet, EIA-485, RS-232 and MeterBus communications makes it a strong choice for off-grid, telecom, agricultural, commercial and professional solar installations in Kenya.
For dependable performance, size the PV array and battery bank according to the controller limits and the electrical requirements of the complete solar system.
You must be logged in to post a review.
DELIVERY POLICY
At Ecotrack Power and Energy Ltd, we ensure reliable and efficient delivery services across Kenya. Our goal is to make every purchase smooth from checkout to doorstep, offering convenience and confidence in every order. Deliveries are handled by trusted partners who maintain safety, care, and timely service in all regions, including urban centers and rural areas.
DELIVERY TIME AND SERVICE
Orders are processed promptly after payment confirmation. Standard delivery within major towns takes one to three business days, while remote areas may take up to a week depending on distance and courier availability. Our logistics team ensures every package is tracked and updates are shared to keep you informed throughout the process.
SHIPPING AND CHARGES
Delivery fees vary depending on product type, size, and destination. Some promotions include free delivery on selected items or bulk orders. Customers can also choose to collect their products directly from our office or authorized pick-up points when available. Each parcel is carefully packed to prevent damage during transit.
RECEIVING YOUR ORDER
Please ensure your delivery details are correct and accessible. Upon arrival, inspect the item before signing for receipt. If damage or loss is noticed, report it within twenty-four hours for prompt assistance. For inquiries or tracking support, reach us at sales@ecotrackpowerandenergyltd.com or 0713294313 / 0713892450
Reviews
There are no reviews yet.